Do you know the penetration process of aluminum alloy die casting?
The die used for the penetration of aluminum alloy die casting parts can be used for a lifetime, almost no loss, reduce or eliminate the cost of the die, the penetration of aluminum alloy die casting parts saves the traditional die core process, saves manpower, reduces the manufacturing cost.
Aluminum alloy die-castingis widely used, but the aluminum alloy die-casting infiltration process, as a new casting process, is also widely used. Today, we will briefly introduce the advantages of aluminum alloy die-casting infiltration process
First, save costs
The mold used for infiltration of aluminum alloy die-casting parts can be used for life with almost no loss, reducing or eliminating the mold cost. The infiltration of aluminum alloy die-casting parts saves the traditional mold core process, saves manpower, and reduces the manufacturing cost p>
The infiltration of aluminum alloy die castings has gradually developed from the casting industry with many male workers to the industry with many female workers. The labor force has been greatly reduced in all aspects, and the cost also comes from the wages of workers. Impregnated sand for aluminum alloy die casting sheet can be recycled with loss of 2% - 5% p>
Second, improve efficiency and output
The foam model impregnated with aluminum alloy die-casting parts is mechanically foamed, which ensures the quality of the model, and the production speed is quite fast. The aluminum alloy die-casting infiltration process simplifies the tedious steps of the traditional process, such as core molding, which is not only laborious, but also inefficient. Immerse aluminum alloy die-casting parts into a box, inject several times, and cast several boxes at the same time until the metal solution is used up p>
Third, improve product quality
Infiltration of aluminum alloy die-casting parts will eliminate defects or waste products caused by the die core, without punching the box, to avoid defects or fragments caused by flash and burr of the box buckle, and to improve the product accuracy p>
After the furnace body is discharged, most of the paint can be naturally peeled off without increasing flash and burr, so the cleaning time can be reduced by more than 50%, and the cleaning cost can also be reduced. As aluminum alloy die casting parts are immersed in dry sand solid negative pressure casting, defects such as air holes and sand holes in the castings are eliminated or reduced. As the aluminum alloy die-casting parts are immersed in the foam forming model, and the metal solution replaces the model, the original shape is as close to the precision casting as possible in terms of surface finish and dimensional accuracy p>